Data type (read-only), Scope, Style – Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual User Manual
Page 94: Produce this tag for up to, Base tag
Publication 1784-UM003A-EN-P – June 2003
86 The Motion Group
Data Type (read-only)
The axis data type: MOTION_GROUP
Scope
Displays the scope of the current tag. The scope is either controller scope, or
program scope, based on one of the existing programs in the controller.
Style
Not applicable to motion group tags.
Produce this tag for up to
A checked box indicates that this tag is available to remote controllers through
controller-to-controller messaging. If this box is checked, the system displays
the maximum number of consumers (i.e., connections) allowed for this tag.
The default number of consumers is 2.
Base Tag
If this tag is an alias, this field displays the name of the motion group tag on
which this alias was based. The base tag actually defines the memory where the
data element is stored.