Watch event armed status, Watch event status, Registration 1 event armed status – Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual User Manual
Page 293: Registration 1 event status, Registration 2 event armed status, Registration 2 event status, Home event armed status
Publication 1784-UM003A-EN-P – June 2003
Motion Object Attributes 285
Watch Event Armed Status
The Watch Event Armed Status bit attribute is set when a watch event has
been armed through execution of the MAW (Motion Arm Watch) instruction.
This bit is cleared when either a watch event occurs or a MDW (Motion
Disarm Watch) instruction is executed.
Watch Event Status
The Watch Event Status bit attribute is set when a watch event has occurred.
This bit is cleared when either another MAW (Motion Arm Watch) instruction
or a MDW (Motion Disarm Watch) instruction is executed.
Registration 1 Event Armed Status
The Registration 1 Event Armed Status bit attribute is set when a registration
checking has been armed for registration input 1 through execution of the
MAR (Motion Arm Registration) instruction. This bit is cleared when either a
registration event occurs or a MDR (Motion Disarm Registration) instruction
is executed for registration input 1.
Registration 1 Event Status
The Registration 1 Event Status bit attribute is set when a registration event
has occurred on registration input 1. This bit is cleared when either another
MAR (Motion Arm Registration) instruction or a MDR (Motion Disarm
Registration) instruction is executed for registration input 1.
Registration 2 Event Armed Status
The Registration 2 Event Armed Status bit attribute is set when a registration
checking has been armed for registration input 2 through execution of the
MAR (Motion Arm Registration) instruction. This bit is cleared when either a
registration event occurs or a MDR (Motion Disarm Registration) instruction
is executed for registration input 2.
Registration 2 Event Status
The Registration 2 Event Status bit attribute is set when a registration event
has occurred on registration input 2. This bit is cleared when either another
MAR (Motion Arm Registration) instruction or a MDR (Motion Disarm
Registration) instruction is executed for registration input 2.
Home Event Armed Status
The Home Event Armed Status bit attribute is set when a home event has
been armed through execution of the MAH (Motion Axis Home) instruction.
This bit is cleared when a home event occurs.