Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual - Manual (Page 66)

Publication 1784-UM003A-EN-P – June 2003
58 Adding and Configuring Your 1784-PM02AE Motion Module
The data on this tab comes directly from the module. If you selected a
Listen-Only communication format when you created the module, this tab is
not available.
Figure 3.11 Module Properties - Module Info Tab
Identification
Displays the module’s:
• Vendor
• Product Type
• Product Code
• Revision Number
• Serial Number
• Product Name
The name displayed in the Product Name field is read from the module. This
name displays the series of the module. If the module is a 1756-L1 module,
this field displays the catalog number of the memory expansion board (this
selection applies to any controller catalog number even if additional memory
cards are added: 1756-L1M1, 1756-L1M2).