Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual User Manual
Page 77
Publication 1784-UM003A-EN-P – June 2003
Configuring the1784-PM16SE Card 69
Status – This is a Read Only field that displays the Controllers current opinion
of the card.
Standby – A transient state that occurs when shutting down.
Faulted – It is unable to communicate with the card. When Faulted is
displayed, check the Connection Tab fore the fault listing.
Validating – A transient state that occurs prior to connecting to the card.
Connecting – The state while the connection(s) to the cards are
established.
Running – The card is communicating and everything is working as
expected.
Shutting Down – The connections are in the process of closing.
Inhibited – The card is prevented from connecting to the controller.
Waiting – A connection to this card has not been made due to one of the
following reasons.
• Its parent has not yet made a connection to it.
• Its parent is inhibited.
• Its parent is faulted.
Offline – The card is not currently online.
When you insert a card into a slot in a ControlLogix chassis, RSLogix5000
compares the following information for the inserted card to that of the
configured slot:
• Vendor
• Product Type
• Catalog Number
• Major Revision
• Minor Revision
This feature prevents the inadvertent insertion of the wrong card in the wrong
slot.