Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual - Manual (Page 426)

Publication 1784-UM003A-EN-P – June 2003
418 Specifications and Performance
1784-M16SE Motion Card
Specifications
OK and Enable Outputs
Type
Operating voltage
Maximum
Operating current
Solid-state isolated relay contacts
+24V dc nominal (Class 2 source)
26.4V
75 mA
Environmental Specifications
Operational Temperature
Storage temperature
Relative Humidity 0 to 40
° C (32 to 104° F)
-40 to 85º C (-40 to 185ºF)
30 to 95%
Shock
Operating
Non-operating 10G
30G
Vibration
Operating
Non-operating 1G, 5Hz - 500Hz
2G, 5Hz - 500Hz
Agency certification
(when product or packaging is
marked)
UL508 – Industrial Control Equipment
UL1604 – Class I, Division 2, Groups A
B, C, D Hazardous location
marked for all applicable directives
Number of Nodes 16 axes maximum
Card location 32 bit 33MHz primary PCI Bus slot
Card keying 3.3 / 5 VDC universal
Power Dissipation 7.5 W maximum
Backplane Current
5 VDC @ 1.065 A and 3.3 VDC @ 0.050 A
1
Environmental Specifications
Slot Temperature
Storage temperature
Relative Humidity 0-60
° C (32-140° F)
-40 to 85ºC (-40 to 185ºF)
30 to 95% non condensing IEC 68-2-30
Shock
Operating
Non-operating 30g peak acceleration, 11(
±1)ms pulse width
50g peak acceleration, 11(±1)ms pulse width
Vibration 2g @ 10-150Hz per IEC 68-2-6
Plastic Fiber Optic Specifications
Transmission Range
Core Diameter
Cladding Diameter
Cable Attenuation
Operating Temperature
Connector
Bend Radius 1-32 meters
980
μm ± 60μm
1000
μm ± 60μm
140 dB/km @ 650nm
-55 to 85
° C (-67 to 185ºF)
F-SMA standard screw-type connector
2.5 cm