Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual User Manual
Page 45

Publication 1784-UM003A-EN-P – June 2003
SoftLogix Controller 37
4 – Primary with no partner
8 – Synchronized Secondary
9 – Disqualified Secondary with partner
10 – Disqualified Secondary with no partner
Module State – Indicates the redundancy state of the controller. If the
controller does not have the redundancy feature or if it is offline, this field is
empty and the controls are disabled. The possible states include:
0 – Unsupported – also displays when the system is offline.
1 – Undetermined
2 – Primary with Synchronized Secondary
3 – Primary with Disqualified Secondary
4 – Primary with no partner
6 – Synchronizing Primary
7 – Synchronizing Secondary
8 – Synchronized Secondary
9 – Disqualified Secondary with partner
10 – Disqualified Secondary with no partner
Module Compatibility – Shows the modules compatibility with its
corresponding module in the partner chassis. If the controller does not have
the redundancy feature or if it is offline, this field is empty and the controls are
disabled. The possible states include:
0 – Unsupported – also displays when the system is offline.
1 – No compatible Partner
2 – Fully compatible Partner