Vendor, Type, Redundancy enabled – Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual User Manual
Page 23: Name, Description

Publication 1784-UM003A-EN-P – June 2003
SoftLogix Controller 15
Vendor
Displays the name of the controller’s manufacturer.
Type
Select the controller type from the pull-down menu, shown here by catalog
number, platform, and processor.
Choose from:
• 1756-L1 ControlLogix5550 Controller
• 1756-L55 ControlLogix5555 Controller
• 1756-L61 ControlLogix5561 Controller
• 1756-L62 ControlLogix5562 Controller
• 1756-L63 ControlLogix5563 Controller
• 1756-LCE ControlLogixCE Controller
• 1769-L20 CompactLogix5320 Controller
• 1769-L30 CompactLogix5330 Controller
• 1769-L35E CompactLogix5335E Controller
• 1789-L60 SoftLogix5860 Controller
• 1794-L33 FlexLogix5433 Controller
• 1794-L34 FlexLogix5434 Controller
• 618x-LCE PanelViewLogix Controller
• Emulator RSLogix Emulate 5000 Controller
• PowerFlex700S DriveLogix5720 Controller
Redundancy Enabled
Check this box if you wish to enable redundancy for this controller. Note that
this option is disabled if you have chosen a controller that does not support
redundancy.
Name
Enter the name you wish to use for the new controller. This name is also used
for the project file, with a .acd extension.
Description
Enter a description of the controller.