Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual User Manual
Page 48

Publication 1784-UM003A-EN-P – June 2003
40 SoftLogix Controller
Click on the Load/Store button to access the Nonvolatile Memory
Load/Store dialog, from which you can perform the actual operations.
The Nonvolatile Memory tab also provides you with status information that
indicates any conditions that might prevent you from loading or storing.
Possible status messages include:
• Nonvolatile memory not present.
• Nonvolatile memory not supported in redundant systems.
• Controller being edited by another user.
• No controller image or stored controller image.
• Controller not in Program mode.
• Stored image revision in nonvolatile memory does not match controller
revision.
The Controller Properties dialog displays controller configuration information
for the open project and, when online, for the attached controller.
The Nonvolatile Memory tab provides you with access to nonvolatile memory
operations.
Note: This tab is available only when the selected controller supports
nonvolatile memory.