Tag type, Data type, Scope – Rockwell Automation 1784-PM16SE SoftLogix Motion Card Setup and Configuration Manual User Manual
Page 179: Style, Assigning additional motion axes
Publication 1784-UM003A-EN-P – June 2003
Naming & Configuring Your Motion Axis 171
Tag Type
Indicates the type of the current tag. This type may be:
• Base
• Alias
• Consumed
Displays the data type associated with the current tag.
Data Type
Displays the axis data type of the current tag.
Scope
Displays the scope of the current tag. The scope is either controller scope, or
program scope, based on one of the existing programs in the controller.
Style
Displays the default style in which to display the value of the tag. Note that
style is only applicable to an atomic tag; a structure tag does not have a display
style.
Assigning Additional
Motion Axes
You can assign additional axes by repeating the preceding sections. To name
and assign another axis, refer to the Naming an Axis section.