Konica Minolta Digital StoreFront User Manual
Page 46
Digital StoreFront 5.2 Administration Reference
46
Be sure that the file you upload meets the requirements for watermark images:
~ Supported Images: jpeg,jpg,pjpeg
~ Resolution: 72dpi
~ Min Size: 180px x 180px
~ Recommended Size: 1024px x 1024px
~ Max Size: 1024px x 1024px
~ Max Size in Kbytes: 2000
b.
Click Open.
c.
Click Upload.
2.
Scale to Fit: Will fit the image to the selected media.
3.
Opacity: Specifies the degree of transparency (in decimals; e.g., .5 = 50% opacity) for the watermark
image.
4.
Vertical: The number of points from the specified position: Top, Bottom, Center.
If you accept the default 0, the image will be positioned at the selected placement origin.
5.
Horizontal: The number of points from the specified position: Left, Center, Right.
If you accept the default 0, the image will be positioned at the selected placement origin.
6.
Allow Printing: Check this box to enable the buyer to print the PDF preview file (i.e., the version
with the watermark).
If this box is unchecked, the PDF is password-protected and the buyer will not be able to
print the preview document.
7.
Reset Watermark Image To Default: Restores the default watermark image (overriding any custom
watermark image you have uploaded).
8.
Click Save.
You must save changes before previewing the watermark.
9.
To preview the watermark with the choices you have made on a particular media, select the media
from the pull-down list in the Select Media To Preview Watermark field then click View.
It may take a few seconds for the View link to be available while Digital StoreFront
recalculates the size of the watermark with the selected font and size and positions it on the
media.
Certain media characteristics will not be demonstrated in the preview (e.g., weight,
thickness, and the holes for 3-hole punched paper will not be represented on the preview).