Konica Minolta Digital StoreFront - Manual (Page 115)

Platform Settings
115
— Enable Save Button
— Disable Upload Button
2. To specify a banner for the PrintMessenger print driver:
• Click Browse... and locate the image you want to use as a banner.
Make sure that the image you select for the banner meets the following requirements:
Supported Images: bmp
Resolution: 72dpi
Min Size: 45 3pixels x 68 pixels
Recommended Size: 453 pixels x 68 pixels
Max Size: 453 pixels x 68 pixels
• Click Upload.
3. Click Save.
To revert to the Windows PrintMessenger's default banner and configuration settings that
shipped with Digital StoreFront click Default & Save.
See Also
● Installers
● Mac PrintMessenger
● Windows eProve (MicroPress v. 8.0.4.0 and older)
● MicroPress (v. 8.0.5.0 and newer)
● RPC (Remote Print Center)
Mac PrintMessenger Install
On the Mac PrintMessenger Install page you can adjust the settings that determine how the Mac
PrintMessenger installer looks and operates.
You might be prevented from changing settings for some installers if the installer is being built
(indicated by the install in progress icon ).
To configure the Mac PrintMessenger installer settings
1. Configure the Mac PrintMessenger settings as needed:
• Mode
•
HTTP: This mode provides standard Web communication.