Konica Minolta Digital StoreFront - Manual (Page 321)

Product Management
321
To view print services/capabilities
1. On the Manage Print Services page, from the Print Service Category pull-down list, select a
category.
Print services are organized into categories, such as Binding, Cutting, and Stapling. Each
category has individual options. For example, the print service category “Stapling” includes print
services such as Upper Left (slant), Bottom Left (slant), etc.
The Manage Print Services page lists both the print service category ID (upper right) and the print
services IDs corresponding to each print service (2nd column in the table). These can be used, for
instance, in an MIS database to map services between Digital StoreFront and the MIS.
Managing Custom Print Services
In addition to the standard print services built in to Digital StoreFront, you can define any number of
custom print services to match the capabilities of available output and finishing devices.
After enabling pre-installed standard print services that correspond to the equipment available at
a print shop, review the list of categories and print services you created for each print shop. You can
add a custom print service for service options you provide that is not already included in the standard
set of print services defined in Digital StoreFront. Note, however, that no all print service categories
allow adding new print services.
The print services you define will be available for creating ticket templates and building products in your
print shops.
Here are a few examples of custom print services: