Konica Minolta Digital StoreFront - Manual (Page 306)

Digital StoreFront 5.2 Administration Reference
306
•
Media Size—Select the size of media.
• Media Color—Select the color of the media.
• Media Weight—Select the weight of the media.
•
Media Hole Pattern—Select a hole pattern for the media.
•
Media Type—Select a type for the media.
•
Media Tab Count—Specify the number of tabs on the media. This will cause the tab definition
panel to open:
• Specify the dimensions of tab in the Tab Measure fields:
o
Tab Measure 1: specifies the height of the tab (the length from the edge of the page to
the leading edge of the tab).
o
Tab Measure 2: specifies the length of the leading edge of the tab.
o
Tab Measure 3: specifies the length of the tab's outdent (the distance between its two
outdent endpoints).
o
Tab Measure 4: specifies the distance from the top edge of the page to the first
outdent of the tab.
o
Tab Measure 5: specifies the distance from the bottom tab (last) tab on the page to the
bottom edge of the page.
• Media Thickness—Specify the thickness of the media (e.g., in micrometers).
2. Configure MicroPress Ticket Integration—Indicates action required before or after printing jobs on
an EFI MicroPress output device. For MicroPress 6.3.07 or above:
• Requires Preprint Action—Check this box to display a dialog to the operator to set up media
before printing. (Applies to MicroPress only.)
•
Requires Postprint Action—Check this box if the feature you are adding requires postprint
action on the part of an operator at the print shop. (Applies to MicroPress only.)
3. Define pricing for the media on the available price sheets.
For complete information on pricing media, see Price Sheets .
4. Click Save to apply your changes, or click Cancel to discard your changes.