Yaskawa MP2200 Machine Controller - Manual (Page 93)

3.1 SVB-01 Module Setup
3-21
■ Update Current Value
This function is enabled only for servo parameters. Current values are not automatically updated
when the servo parameters are displayed. Select View
− Update Current Value to read and display
the most recent values.
The following table shows the functions given above.
* Possible when the servo is ON.
（ Note）Yes: Operation possible, NO: Operation not possible.
[ c ] Motion Parameter Settings
■ Fixed Parameters Tab Page
Set the parameters required for motion control on the Fixed Parameters Tab Page.
For details on each of the fixed parameter settings, refer to 4.3.1 Motion Fixed Parameter Details.
Motion Fixed
Parameters
Motion Setting
Parameters
SERVOPACK
Parameters*
Motion
Monitoring
Parameters
Remarks
Axis Data Copy /Axis
Data Paste
Yes Yes No No −
Details Yes Yes No Yes
Parameters in bit
format only
Default Set Yes Yes Yes No −
Copy Current Value No No Yes No
Enabled only when
online
Update Current
Value
No No Yes No
Enabled only when
online
Setting Details
Axis Number Select the desired axis number. Set the fixed parameters for each axis.
SERVOPACK Displays the type of SERVOPACK.
Version Displays the version of SERVOPACK.
Servo Type
(Motor Type)
Displays the motor type.
No. Displays the parameter number of the motion fixed parameter.
Name (Parameter Name) Displays the parameter name.
Input Data (Set Data) Input (or select) the parameter value.
Unit Displays the units of the corresponding parameter.
INFO