Yaskawa MP2200 Machine Controller - Manual (Page 104)

3 Motion Module Setup
3.2.3 Module Configuration Definitions
3-32
The SVA-01 Definitions Window is composed of three tab pages: the Fixed Parameters, Set Up
Parameters, and Monitor Tab Pages.
It is possible to switch between these tab pages by selecting View − Next Page or View − Back Page
from the motion parameters window's menus.
[ b ] SVA Definitions Menus
These menus can be used only in the SVA Definitions Windows.
■ Axis Data Copy
Select the axis data to be copied, and then select Edit − Axis Data Copy from the menu. The source
axis data will be copied and saved temporarily in the cut buffer.
■ Axis Data Paste
Select the axis data to be copied, and then select Edit − Axis Data Paste from the menu. The axis
data saved temporarily in the cut buffer will overwrite the axis data at the copy destination.
Copying between axes is possible using the Axis Data Copy and the Axis Data Paste functions.
Copying between axes requires separate operations for fixing and setting parameters. If the pasted
data is for a different type of motor, an error message will be displayed.
■ Details
Use this function to display setting data as bit images for motion parameters except for
SERVOPACK parameters. The information can be displayed for each bit by selecting Edit
− Details
from the menu.
■ Default Set
Use this function to restore the settings data for the fixed and setting parameters to their default
values.
Select Edit
− Default Set from the menu. The axis parameters currently displayed will be set to their
default values. Parameters whose current values are displayed will have their current values updated.
Table 3.2 Motion Parameter Window Tab Pages
Tab Page Details
Fixed Parameters Sets the Motion Fixed Parameters.
Set Up Parameters Sets the Motion Setting Parameters.
Monitor Displays the Motion Monitoring Parameters.
Menu Command Function
Edit
Axis Data Copy Temporarily saves the displayed axis setting data.
Axis Data Paste
Copies the temporarily saved axis data to the
currently selected axis data.
Details Displays individual data in bit format.
Default Set Sets the default value.
IMPORTANT