Yaskawa MP2200 Machine Controller - Manual (Page 92)

3 Motion Module Setup
3.1.3 Module Configuration Definitions
3-20
[ b ] SVB Definitions Menus
These menus can be used only in the SVB Definitions Windows.
■ Axis Data Copy
Select the axis data to be copied, and then select Edit − Axis Data Copy from the menu. The source
axis data will be copied and saved temporarily in the cut buffer.
■ Axis Data Paste
Select the axis data to be copied, and then select Edit − Axis Data Paste from the menu. The axis
data saved temporarily in the cut buffer will overwrite the axis data at the copy destination.
Copying between axes is possible using the Copy Axis Data and the Paste Axis Data functions.
Copying between axes requires separate operations for fixing, setting, and SERVOPACK parame-
ters. If the pasted data is for a different type of motor, an error message will be displayed.
■ Details
Use this function to display setting data as bit images for motion parameters except for servo
parameters. The information can be displayed for each bit by selecting Edit
− Details from the menu.
■ Default Set
Use this function to restore the settings data for the motion fixed parameters, setting parameters, and
servo parameters to their default values.
Select Edit
− Default Set from the menu. The axis parameters currently displayed will be set to their
default values. Parameters whose current values are displayed will have their current values updated.
■ Copy Current Value
This function is enabled only for servo parameters. It overwrites the settings data using the data
displayed in the Current Value. Select Edit
− Copy Current Value from the menu. The data on the
SERVOPACK will be overwritten temporarily.
Check the details displayed, and then select File
− Save from the menu to save the data permanently.
This operation is possible while the servo is ON.
Menu Command Function
Edit
Axis Data Copy Temporarily saves the displayed axis setting data.
Axis Data Paste
Copies the temporarily saved axis data to the
currently selected axis data.
Details Displays individual data in bit format.
Default Set Sets the default value.
Copy Current Value Sets the current value to the set data.
View
Update Current Value
Updates the display of the current value of the servo
parameters.
IMPORTANT