Grass Valley iControl V.4.43 - Manual (Page 84)

Getting Started with iControl
Configuring GPI Outputs on a GPI-1501
74
Figure 2-47
6. In the GPI Card list, select the GPI-1501 card whose GPI outputs you would like to control
from this alarm.
Figure 2-48
The eight output relays on the selected card are shown. The names of the GPIs are set in the
GPI I/O Config panel of the GPI card itself.
7. You may program one or more GPI outputs on this card or on other cards to respond to this
alarm.
Note: Only configurable GPIs that are configured as OUT on the GPI-1501 card itself
can be operated in this manner.