Grass Valley iControl V.4.43 - Manual (Page 318)

Access Control
Configuring the LDAP Service on an iControl Application Server for a Single Domain
308
Configuring the LDAP Service on an iControl Application Server for a Single
Domain
To configure the LDAP service on an iControl Application Server for a single
(local) domain
1. On the Access Control Configuration Form, in the Base Domain managed by this server
field, type the name of the domain (e.g. toronto.myCompany.com ) that this Application
Server will manage.
Figure 6-8
2. Leave the Superior referral IP field empty.
3. Click Initialize.
4. Select the Run LDAP service on this Application Server check box.
As the LDAP service starts up, the Webmin page reloads.
5. In the Domains Managed Here area, click Add.
Figure 6-9
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened the Access Control Configuration Form in iControl (see page 703 ).
• You have read "Rules for Local Domains" , on page 313.
Note: If this Application Server has previously been used to run an LDAP service,
the button will be labelled Reinitialize.