Grass Valley iControl V.4.43 - Manual (Page 179)

iControl
User Guide
169
Creating an Incident Template
Creating an Incident Template from Incident Log Viewer
To create an incident template using Incident Log Viewer
1. In Incident Log Viewer, on the File menu, click Incident Templates.
Figure 4-88
The Incident Templates window appears.
Figure 4-89
2. In the Incident Templates window, click Add.
The Incident template configuration window appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).
• You have opened Incident Log Viewer (see page 724 ).