Grass Valley iControl V.4.43 - Manual (Page 319)

iControl
User Guide
309
A window appears, prompting you to type a domain name.
Figure 6-10
6. Type the local domain name, and then click OK.
The newly added local domain appears in the list under Domains Managed Here.
At this point, the LDAP service is running on the Application Server, and configured for a
single domain.
Configuring the LDAP Service on an iControl Application Server for Multiple
Domains
To configure the LDAP service on an iControl Application Server for multiple
domains
1. On the Access Control Configuration Form, in the Base Domain managed by this server
field, type the name of the domain
(e.g.
myCompany.com ) that this Application Server will manage.
Figure 6-11
2. Leave the Superior referral IP field empty.
3. Click Initialize.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened the Access Control Configuration Form in iControl (see page 703 ).
• You have read "Rules for Local Domains" , on page 313.
• You have the illustration "Sample Multi-Domain Setup" , on page 313 available as a
reference.