Grass Valley iControl V.4.43 - Manual (Page 443)

iControl
User Guide
433
Figure 7-114
3. So far, we have only been looking at the SEM’s overall alarm. At this point, it might be useful
to look at the alarms for the device. The fastest way to do this is to return to the Web page
and right-click any one of the SEM sub-alarms, and then select Show status in GSM
browser from the drop-down menu.
The GSM Alarm browser window appears, with the sub-alarm highlighted inside the folder
containing all of the SEM’s sub-alarms. Looking a little further down the list, we can se the
Primary GigE sub-alarm is red.
The contribution of this sub-
alarm caused the SEM overall
(virtual) alarm to turn red
Status logic determines how
any given sub-alarm error will
affect the overall alarm