Grass Valley iControl V.4.43 - Manual (Page 411)

iControl
User Guide
401
To create a virtual alarm
1. In the Create a new alarm provider area of the GSM Alarm Browser, click Virtual alarm.
2. Click New.
Figure 7-73
The Build virtual alarm window appears.
Figure 7-74
3. In the Status logic section, select one of the following three options:
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
• You have opened the GSM Alarm Browser (see page 732 ).