Grass Valley iControl V.4.43 User Manual
Page 67
iControl
User Guide
57
To specify the DNS settings to be used by the iControl Application Server
1. On the Network Configuration page, click Hostname and DNS Client.
The Hostname and DNS Client page appears.
Figure 2-31
2. In the Hostname field, type the host name by which you would like this Application Server
to be known on your network.
3. Select the Update hostname in host addresses if changed check box.
4. Configure the other parameters as required:
5. Click Save.
6. Return to the Network Configuration page by clicking the Return arrow at the bottom of the
Hostname and DNS Client page.
Note: This function ensures the host name in the Host Addresses page is the same
as the host name in the Hostname and DNS Client page.
Parameter
Detailed instruction
Resolution Order
Do not change the values in these six boxes unless your system administrator advises
otherwise.
DNS Servers
The IP address
127.0.0.1
, corresponding to localhost, appears by default. Do not
change this address. You may type the addresses of other DNS servers in the lines
below. Consult your system administrator
Search Domains
Click the Listed option button, and then type a list of all the domains where you wish
to have the Application Server look for DNS services (one line per domain). You should
type at least your own local domain name. (e.g.
www.miranda.com
).
Note: Clicking Save does not update the Application Server with the new
configuration. To apply your changes, you still need to click Apply Configuration on
the Network Configuration page or restart the system through Webmin
(see
"Restarting the Application Server"
IMPORTANT: Do not click Apply Configuration on the Network Configuration page.