Grass Valley iControl V.4.43 - Manual (Page 491)

iControl
User Guide
481
Adding an OID Getter and Variable Getter from a MIB Module
You can add an OID Getter or a Variable Getter to the script directly through the graphical
interface:
• "Adding an OID Getter" , on page 481
• "Adding a Variable Getter" , on page 483
Adding an OID Getter
To add an OID getter to the script
1. In SNMP Driver Creator, click the Script editor tab.
Figure 8-72
The Script editor appears in the main pane.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened SNMP Driver Creator (see page 737 ).
• You have configured a name for your SNMP driver (see page 467 ).
• You have loaded a MIB module into SNMP Driver Creator (see page 462 ).