Grass Valley iControl V.4.43 - Manual (Page 81)

iControl
User Guide
71
Figure 2-43
2. In the Auto Start column, select the Auto check box.
This is to ensure that the iControl Services Gateway will restart automatically if the
Application Server is rebooted.
3. In the Start/Stop/Restart column, click the left-most button (corresponding to Start).
4. Click Apply.
After a few seconds, the Web page will reload, and the row corresponding to iControl
Services Gateway will be green (indicating that the service is active).
Task 6: Configuring GPI Outputs on a GPI-1501
This procedure allows you to configure the GPI outputs on a GPI-1501 to respond to alarms
triggered on another card on the iControl network.