Grass Valley iControl V.4.43 - Manual (Page 418)

Alarms in iControl
Modifying a Virtual Alarm
408
Modifying a Virtual Alarm
To modify a virtual alarm
1. Select the virtual alarm to be edited in the GSM Alarm Browser.
Figure 7-86
2. Click Edit plug-in.
The Build virtual alarm window appears, displaying the configuration information for the
selected virtual alarm.
3. Make changes as required, and then click OK.
Removing a Virtual Alarm
To remove a virtual alarm
1. Select the virtual alarm to be removed in the GSM Alarm Browser.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
• You have opened the GSM Alarm Browser (see page 732 ).
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
• You have opened the GSM Alarm Browser (see page 732 ).