Grass Valley iControl V.4.43 - Manual (Page 466)

iControl and SNMP
Enabling iControl to Manage an SNMP Device
456
will be able to get status information on the device by polling or querying the IRD’s agent, and
to issue controls (such as restart), if they are supported.
A generic SNMP manager is also available that allows you to write your own SNMP drivers.
Enabling iControl to Manage an SNMP Device
To enable iControl to manage an SNMP device
1. In iC Navigator, double-click on a GSM to open its Alarm Browser window.
Note: The generic SNMP manager and third party SNMP drivers are not included in
the basic iControl package. They must be purchased separately. Contact your
Miranda sales representative for details.
Note: The SNMP agent on the device must be enabled. Please consult the
documentation that came with the device for instructions.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• There is an active connection between the iControl Application Server and the SNMP
device.
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).