Grass Valley iControl V.4.43 User Manual
Page 291
iControl
User Guide
281
Loading a Device’s Preset Configuration Data as its Current Configuration
To load a device’s preset configuration data as its current configuration
1. In the Device Profile Manager, click the Presets tab near to the top of the Device Profile
Manager
The Presets tab displays listings of discovered or preset devices.
Figure 5-66
2. Click Show all devices to populate the list.
3. In the Available devices area, select those devices with presets you would like to set as the
active configuration.
4. If you would like to assign presets individually for each of the selected devices, select the
preset you would like to load as the active configuration.
Figure 5-67
5. If you would like to assign one preset to multiple devices, perform the following steps:
a) Select those devices for which you would like to assign a preset as the active
configuration.
REQUIREMENT
Before beginning this procedure, make sure you have opened the Device Profile Manager
(see
).
Note: When a preset is selected in the Preset column, the corresponding Apply
check box is automatically selected.