Grass Valley iControl V.4.43 User Manual
Page 482
iControl and SNMP
Creating an Alarm with a MIB Element Shortcut Menu
472
Figure 8-54
3. Modify the alarm parameters as required.
The parameters are as follows:
4. Click OK.
A new alarm is created and listed in the Alarms table.
Figure 8-55
Parameter
Description
MIB
The MIB where the OID was retrieved from
MIB variable name
The label of the MIB node
OID
The object identifier (OID) value of the MIB node
GSM name
The name to be shown on the GSM for this alarm
Type
The type of alarm (status, text, or both). For more information about alarm types, see
Mode
The mode of the alarm
Alarm subpath
The path in the Alarm Browser tree where the alarm is created
Alarm map
The associated alarm map for this alarm
Trap map
The associated trap map for this alarm
Poller profile
The associated poller for this alarm