Grass Valley iControl V.4.43 - Manual (Page 397)

iControl
User Guide
387
Figure 7-51
Removing Alarm Providers
To remove an alarm provider
1. In the GSM Alarm Browser, select the alarm provider to be removed, and then click Remove
plug-in.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
• You have opened the GSM Alarm Browser (see page 732 ).
The new instance of the alarm
provider also creates an overall alarm
for the Kaleido frame. The name and
path correspond to what was
entered in the configuration
window.
The Kaleido is an SNMP device,
so the alarm provider publishes
its alarms here.