Grass Valley iControl V.4.43 - Manual (Page 263)

iControl
User Guide
253
To add a Kaleido-Solo service
1. In iControl Navigator, double-click DensiteManager in the logical view.
Figure 5-17
2. In DensiteManager, click Add.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You know the IP address of the Kaleido-Solo device.
• You have opened iControl Navigator (see page 719 ).
• You have started the Densité Manager service in iControl (see "Stopping, Starting, or
Restarting a Service" , on page 700).