Grass Valley iControl V.4.43 - Manual (Page 82)

Getting Started with iControl
Configuring GPI Outputs on a GPI-1501
72
To configure GPI outputs on a GPI-1501
1. In the GSM Alarm Browser, use the vertical scroll bar to find the alarm for which you would
like to trigger a GPI output on a GPI-1501 card.
Figure 2-44
2. Double-click the alarm.
The Alarm Properties window appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened the GSM Alarm Browser (see "Opening the GSM Alarm Browser" , on
page 732).