Grass Valley iControl V.4.43 - Manual (Page 534)

iControl and SNMP
Adding an Object from the MIB Browser
524
directly available in the MIB Browser. The second applies where the parameter is contained in
an SNMP table.
Adding an Object from the MIB Browser
This procedure applies to MIB parameters that are not contained in an SNMP table.
To add a third-party SNMP alarm object to a Web page
1. In iC Creator, on the View menu, click Open MIB Browser.
Figure 8-133
The MIB Browser window opens.
Note: Before beginning either procedure, make sure that the iControl Application
Server you will be using has an active connection to the third-party SNMP device.
You will also need the device’s IP address, as well as a copy of its SNMP MIB.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iC Creator (see page 746 ).