Grass Valley iControl V.4.43 - Manual (Page 432)

Alarms in iControl
Setting a Schedule for an Alarm
422
Setting a Schedule for an Alarm
To define a schedule for an alarm in iC Web or iC Navigator
1. Right-click the alarm, and then click Create schedule.
Figure 7-103
2. In Schedule Entry Details, type a name for the schedule, and set the appropriate options
such as the start date and time (see ), recurrence pattern, and the end date.
• scheduling inversion actions, see "Alarm Inversion Scheduling" , on page 375 and
"Setting a Schedule for an Alarm Inversion" , on page 424
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• If you are working in iC Web, make sure you have opened the required iControl Web
page (see "Working with iC Web" , on page 741).
• If you are working in iC Navigator, make sure you fulfill the following conditions before
beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
See also (Continued)
For more information about: