Grass Valley iControl V.4.43 - Manual (Page 425)

iControl
User Guide
415
Checking the Operational Mode of an Alarm
To check the operational mode of an alarm
• Right-click the status icon of the alarm, point to Operational mode, and verify which of the
operational modes are active, if any.
Figure 7-94
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• If you are working in iC Web, make sure you have opened the required iControl Web page
(see "Working with iC Web" , on page 741).
• If you are working in iC Navigator, make sure you fulfill the following conditions before
beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
Note: The same shortcut menu is available in both iC Web and iC Navigator, to
make it easy for operators to manually enable, disable, or check the operational
mode for selected alarms.