Grass Valley iControl V.4.43 - Manual (Page 296)

Configuring Devices & Services
Copying Densité Card Profiles
286
Figure 5-74
To copy a card profile
1. In iC Navigator, double-click the card whose profile you would like to copy.
The Info Control Panel for the card appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).
The settings
from this card,
collectively
referred to as its
profile, can be
copied to other
cards of the
same type and
firmware version
The profile
cannot be
copied to these
cards because
they do not
have the same
firmware
version
Profiles can be copied to
cards on any Application
Server visible on the
network