Grass Valley iControl V.4.43 User Manual
Page 619
iControl
User Guide
609
Figure 10-30: An online configured Main and a standby configured Backup: successful operation
6. Log on to iControl for the configured Backup Application Server (see
).
7. Navigate to the Redundancy Configuration Form for the configured Backup Application
Server (see
).
8. In the Main area, select the check box in the column header of the Auto-failover column.
9. Click Apply at the bottom of the Auto-failover column.
The Auto-failover function is re-enabled on all Main Application Servers in the Redundancy
Group.
Reconfiguring an Offline, Configured Main Application Server in a Backup
Role
This procedure assumes the following:
• A Main Application Server Autofailed to, or was manually taken over by, a Backup
Application Server.
• There are more than one configured Main Application Servers in the Redundancy Group.
• All required maintenance and troubleshooting work on the configured Main Application
Server is complete.
• You would like the configured Main Application Server to be returned to the Network, but
reconfigured in the role of a Backup Application Server.
• You would like the online, configured Backup Application Server to be reconfigured as the
online Main Application Server.