Grass Valley iControl V.4.43 - Manual (Page 624)

Backup and Redundancy
Configuring and Managing Autofailovers of Application Servers
614
The Host Addresses page appears.
3. Click the Application Server’s IP address.
Figure 10-37
The Edit Host Address page appears.
Figure 10-38
4. Type the desired IP address for this Application Server.
5. Click Save.
The Host Addresses page appears displaying the changed IP address and host name.
6. Click Return to network configuration to return to the Network Configuration page.
The Network Configuration page appears.
7. Click Network Interfaces.
Figure 10-39