Example — monitoring a virtual alarm – Grass Valley iControl V.4.43 User Manual
Page 441
iControl
User Guide
431
Figure 7-112
5. In the Action details section, select the appropriate action in the list, and specify the length
of the period during which the specified action will apply.
The selected alarm already appears in the Selected alarms list.
6. To add other alarms to this schedule, select them in the Available alarms list, and click the
down arrow button to add them to the Selected alarms list.
TIP: Multiple alarms can be selected at once by holding down the Shift or Ctrl key while
clicking.
7. To remove alarms from the Selected alarms list, select them and click the up arrow button.
8. Click OK.
Example — Monitoring a Virtual Alarm
The following example shows how to investigate the error status of a virtual alarm. In this
example, let’s consider a Web page set up to monitor a signal path that contains an SNMP
device such as a Motorola SmartStream Encryptor/Modulator (SEM). The Web page might
represent the SEM portion of the signal path as shown below.