Changing a source’s channel assignments, Editing a comparison group’s properties, Changing a – Grass Valley iControl V.4.43 User Manual
Page 577: Source’s channel assignments
iControl
User Guide
567
An asterisk (*) appears next to the name of the comparison group indicating pending
changes.
3. Click Apply all to save changes to the comparison group.
The asterisk next to the comparison group name disappears indicating all changes are now
saved and saved to the group.
Changing a Source’s Channel Assignments
To change a source’s channel assignments
1. On the Configuration tab, in the Fingerprint comparison setup area, expand the
comparison group folder representing the group whose source’s channels you would like
to configure.
2. In the Audio 1 channel list of the source whose configuration you are changing, select the
desired channel.
Figure 9-26
3. Perform
for all visible Audio channel list for this source (e.g. Audio 2 list and Audio 3
list).
4. Click Apply all to save all changes to the comparison group.
The asterisk next to the comparison group disappears.
Miscellaneous Fingerprint Comparison Configuration Tasks
Editing a Comparison Group’s Properties
Edit a comparison group’s properties when you would like to change any of the following
settings of an existing comparison group:
• Name (of the comparison group)
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened Audio Video Fingerprint Analyzer (see
).
• There are currently no comparisons underway for the comparison group you would like
to edit.