Grass Valley iControl V.4.43 - Manual (Page 79)

iControl
User Guide
69
locations page of the Application Server running the Densité, Imagestore, or other service on
the local subnet.
On the Application Servers in the different subnet, you need to specify the IP address of the
lookup service where a GSM is registered in the other subnet.
Adding an Alarm Publication Lookup Location
To add an Alarm publication lookup location
1. On the iControl Lookup locations page, type one of the following:
• the IP address of an Application Server on a remote subnet that is running a GSM
• the IP address of an Application Server on a remote subnet that is running a lookup
service
2. Click Add lookup.
The address appears in the Alarm publication lookup table.
Figure 2-42
3. Restart the specific service (e.g. Densité Manager) that you wish to publish to the remote
GSM, or restart iControl to publish all services to the remote GSM (see "Starting & Stopping
iControl Services" , on page 697).
REQUIREMENT
Before beginning this procedure, make sure you have opened the iControl Lookup locations
page for the Application Server that is running the Densité, Imagestore, or other service you
wish to publish to remote GSMs (see
page 716 ).
Note: Use of the Name field to indicate the Application Server’s host name is
optional.