Grass Valley iControl V.4.43 - Manual (Page 495)

iControl
User Guide
485
Figure 8-80
2. Select the checkbox corresponding to each desired Application Server, and then click OK.
If the operation is a success, a confirmation message appears.
Figure 8-81
3. Click OK.
IMPORTANT: Requirement for viewing new driver in GSM alarm browser
If, when creating and packaging your driver, the GSM alarm browser is
currently open, you will not see the new driver in GSM after packaging is
complete. At this time, you must close your GSM alarm browser, then
reopen it to see the new driver.