Grass Valley iControl V.4.43 - Manual (Page 468)

iControl and SNMP
Enabling iControl to run a Custom SNMP Driver
458
Figure 8-29
In the Alarm Browser window, alarms for the device will appear in a folder whose name
corresponds to the IP address of the SNMP device. In a separate folder, under the path
specified in the previous step, an alarm will be created to monitor the status of the SNMP
driver instance. In both cases, iControl will create the folders if they do not already exist.
Figure 8-30
Enabling iControl to run a Custom SNMP Driver
Note: The SNMP agent on the device must be enabled. Please consult the
documentation that came with the device for instructions.
Host name or IP address of
the device to be managed
Folder in the alarm browser
that will contain the device’s
alarms; slash-separated string
Folder and alarms specific
to the SNMP device Status of the SNMP
driver instance