Grass Valley iControl V.4.43 - Manual (Page 530)

iControl and SNMP
AppServer Health Monitoring Plug-in
520
AppServer Health Monitoring Plug-in
The AppServer Health Monitoring plug-in is a custom SNMP driver created by Miranda that
takes advantage of the Net-SNMP agent to monitor the health of an iControl Application
Server and its services. This plug-in polls the Net-SNMP agent for health monitoring data, and
reports the results within the GSM’s Alarm Browser.
The following screens show typical alarms available via the GSM AppServer Health Monitoring
plug-in.
Figure 8-127
To enable the GSM AppServer Health Monitoring plug-in
1. Open iC Navigator from the Startup page of an Application Server, and then double-click
on a GSM to open its Alarm Browser window.
2. In the list under Create new alarm provider, select AppServer Health Monitoring, and
then click New.