Grass Valley iControl V.4.43 - Manual (Page 620)

Backup and Redundancy
Reconfiguring an Offline, Configured Main Application Server in a Backup Role
610
To reconfigure an offline, configured Main Application Server in a Backup role
1. In the Main area of the Redundancy Configuration Form, make sure the Auto-failover
function for all Application Servers is disabled by clearing all Enabled check boxes.
Figure 10-31
2. Click Apply.
3. In another browser window, log into iControl for the other Main Application Server (that is,
neither A1 nor A2) (see "Starting iControl" , on page 696).
4. Navigate to the Redundancy Configuration Form page on the Application Server
mentioned in step 3 .
5. Identify A2 in the Backup area.
IMPORTANT: This procedure uses the following naming conventions:
• The configured Main Application Server (currently offline) is Application
Server A1.
• The configured Backup Application Server (currently online) is Application
Server A2.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl for the A2 Application Server (see page 696 ).
• You have navigated to the Redundancy Configuration Form for the A2 Application
Server (see page 712 ).
Note: You can disable Auto-failover for all Application Servers at once by clearing
the check box in the Auto-failover column header.