Grass Valley iControl V.4.43 - Manual (Page 267)

iControl
User Guide
257
Cutting and Pasting a Group
To cut and paste a group
1. In iControl Navigator, right-click the group you would like to cut.
2. From the pop-up menu that appears, select Cut.
3. Right-click the new location (folder or sub-folder) for the group, and select Paste.
The group appears as a new folder in the chosen location.
Renaming a Group
To rename a group
1. Select the group (folder) you wish to rename.
2. Right-click the group folder and click Rename Group.
The Rename Group window appears.
Figure 5-25
3. Type a new name for the group, and then click Rename Group.
The new group name appears for the chosen folder.
Removing a Group
To remove a group
1. Open the group folder that you plan to remove.
2. Move (drag-and-drop or cut-and-paste) all devices out of the group folder to a new
location. Only empty groups can be removed.
3. Right-click the group folder and click Remove Group.
The selected group no longer appears in the iC Navigator window.
Creating a Proc Amp Device
To create a proc amp device
1. Open the iControl Services Monitoring and Configuration page in Webmin (see "Starting &
Stopping iControl Services" , on page 697).
Note: Make sure the Virtual Service Manager is active (green).