Grass Valley iControl V.4.43 User Manual
Page 260
Configuring Devices & Services
Working with Densité Communicators
250
•
Click Remove to delete the Communicator from the list. If the Communicator had
been added to an iC Web page, the alarm for that element will turn red.
•
Click Reset to stop and then restart the selected Communicator.
•
Click Standby to interrupt the data flow to and from the Densité frame.
•
Click Online to restore the data flow to and from the Densité frame.
5. Click Add to add a new Densité Communicator (frame) to the list.
The Target Information window appears.
Figure 5-14
6. Under Server Type, select standalone.
7. Type the Densité frame’s IP address and a descriptive name in the fields provided. These are
used to define the alarm IDs in the GSM.
You can safely ignore all other settings in the Configuration tab—this functionality has
been superseded by other iControl modules.
8. Click OK.
The new Densité Communicator will be started and added to the list. iC Navigator will
query that Densité frame, and any devices (cards) it discovers will be displayed.
9. Click the JVM monitor tab.
Information about the Java Virtual Machine (which runs the Communicators) is displayed.
Note: Use Reset when, for example, cards known to be in the frame do not appear
in the iC Navigator window.
Note: If the name or IP address for an existing frame is modified at a later date, any
iC Web pages referring to this frame may no longer work.