Grass Valley iControl V.4.43 - Manual (Page 188)

Logs
Renaming an Incident Log Template
178
Figure 4-96
2. Select the incident template you wish to modify.
3. Click Edit.
The Incident template configuration window appears.
4. Make changes as required, and then click OK.
Renaming an Incident Log Template
To rename an incident log template
1. In Incident Log Viewer, on the File menu, click Incident templates.
The Incident Templates window appears.
Figure 4-97
2. Select the incident template you would like to rename.
3. Click Rename.
The Renaming an incident template window appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iC Navigator (see page 719 ).
• You have opened Incident Log Viewer (see page 724 ).