Grass Valley iControl V.4.43 User Manual
Page 576
Fingerprint Comparison and Analysis
Configuring a Source as the Reference Source in a Comparison Group
566
To configure a source as the reference source in a comparison group
1. On the Configuration tab, in the Fingerprint comparison setup area, expand the
comparison group folder representing the group whose source you would like to configure
as the reference.
Figure 9-24
2. Right-click the source you would like to configure as the reference, and then click Set as
reference source.
Figure 9-25
The desired new reference source’s name becomes italicized and the former reference
source’s name is no longer italicized.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened Audio Video Fingerprint Analyzer (see
).
• There are currently no comparisons underway for the comparison group you would like
to edit.
Note: An italicized source name indicates a source is configured as the reference.