Grass Valley iControl V.4.43 - Manual (Page 405)

iControl
User Guide
395
Adding an Action to a Specific Alarm
To add an action to a specific alarm
1. In the GSM Alarm Browser, right-click the alarm to which you would like to associate an
action, and then click Properties.
Figure 7-65
The Alarm properties window appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened iControl (see page 696 ).
• You have opened iControl Navigator (see page 719 ).
• You have opened the GSM Alarm Browser (see page 732 ).